
Trolley-Case Portable Laser Cleaning Machine MW-LC100 to 300: Take the Cleaning to the Job Site
The MAXWAVE MW-LC is a portable laser cleaning machine built into a trolley case, for repair companies, maintenance teams and contractors whose work sits on the customer's floor, beside an installed machine or out in a yard, where the part cannot be brought back to a workshop.
One technician pulls it on its handle, loads it into the service vehicle and rolls it up to the part. It removes paint, coatings, thin oxide and light rust on site. Heavy rust over large areas is a job for our continuous machines, and the quote says so.
- 100 / 200 / 300 WPulsed fiber laser
- 25 kgComplete machine in the case
- 24 V / 48 VSupply
- <0.75 kgHandheld cleaning head
Transport and Site Access: 25 kg on Wheels
Size and weight decide whether a laser cleaner actually goes out on jobs. The MW-LC is the unit in our range built to leave the building.
Weight against our cabinets

Where that size lets your team work
Workshops and plant floors
Roll it down an aisle to a press, a conveyor or a fixture that cannot be moved, and park it beside the machine.Repair bays and service stations
Take it from bay to bay as jobs come in, with no fixed cleaning cell to book.Service vehicles
It rides in a van or pickup with the rest of the toolkit: laser cleaning becomes one more tool on a call-out.Customer sites and installed equipment
Stand it beside the equipment, frame or structure being repaired where it stands.
Handheld Head and Wireless Phone Control
On site the operator spends the day at the part. The case may be parked below a platform or at the edge of a pit, and the operator keeps working without walking back to it.


- <0.75 kgHandheld cleaning head
- The head is what the operator holds for the whole job, often at arm's length, overhead or at an angle. At this weight it stays manageable through long passes.
- Handle + phoneTwo ways to control it
- Settings change on the handle or on a phone paired wirelessly with the machine. Moving from paint to rust, or from a flat plate to a weld seam, is a change made in hand while the case stays parked.
- 14Scan patterns
- A narrow pattern for seams, edges and corners, a wider one for flat areas, so the cleaned area follows the shape of the part.
- 6Cleaning modes
- Selected from the handle or the phone to suit the layer being removed.
- 100 to 160 mmCleaning width, by model
- A field from 100 to 160 mm wide: wide enough for panels and frames, small enough to stay inside the area that needs cleaning.
- 0 to 100%Laser power
- Gentle settings on painted or thin parts and full power on a tougher layer, in the same visit.
One technician sets up, cleans and adjusts alone. A job at height or below ground does not need a second person standing at the case to change settings.
Site Checklist and Laser Safety on the Job
Every new site is a new work area. Before the first job on a customer's premises, your crew confirms four things.
- The MW-LC runs on a 24 V or 48 V supply. Tell us your country and the supply your crews use on site, and the engineer confirms the supply for your unit before we quote.
- Laser cleaning turns paint, rust and residue into fume and fine particles at the cleaning point. Plan an extraction unit there, indoors and outdoors.
- This is Class 4 laser work. Mark off the area, keep people outside it or protected, and screen reflections, which bright metal surfaces throw back toward the operator and anyone nearby.
- The operator needs to see the layer come off. Set up work lights where the site is dark: pits, enclosures and night shifts.
of 4 confirmed for this siteReady for the first job

Protective equipment, area setup, extraction and operator training are covered on our support and maintenance page.
Air Cooling for Short Jobs and Frequent Moves
It starts quickly once the case is opened and connected, with no chiller to transport or fill. Made for work that changes location often.
Working Range: Thin Layers, Light Rust and Paint
On thin contamination, the time saved by cleaning the part where it stands counts for more than square meters per hour.
| Layer | MW-LC reference |
|---|---|
| Paint, coatings and other organic layers | approx. 5 to 8 m²/h at 100 to 200 W |
| Oxide and rust | Thin oxide and light rust; not heavy scale |
Both figures are approximate. Your rate depends on the base metal, how heavy the layer is and the settings chosen. The engineer gives a figure for your job from your photos.

When another unit fits the job better
Heavy rust or thick paint over large steel areasWater-cooled CW laser cleaning machine: rust and oxide at about 5 to 10 m²/h at 2000 to 6000 W. A workshop cabinet, so the parts come to it.
Work higher up or in tighter spacesBackpack laser cleaning machine: 12 kg, worn by the operator on ladders, platforms and in confined spaces where a case cannot follow.
All four lines side by side: laser cleaning equipment.
MW-LC Technical Specifications
All three models share one case, so the power class you choose does not change what your crew carries.
| Item | MW-LC100 | MW-LC200 | MW-LC300 |
|---|---|---|---|
| Laser power | <100 W | <200 W | <300 W |
| Laser type | Pulsed fiber | ||
| Power adjustment | 0 to 100% | ||
| Cooling | Air | ||
| Supply | 24 V / 48 V | ||
| Scan patterns | 14 | ||
| Cleaning modes | 6 | ||
| Cleaning width | 100 to 160 mm, by model | ||
| Control | Handheld + wireless phone | ||
| Cleaning head weight | <0.75 kg | ||
| Machine size and weight | 38 × 27 × 57.5 cm, 25 kg | ||
| Packed size and weight | 48 × 37 × 68 cm, 35 kg | ||
Typical Field Jobs for the MW-LC
Thin layers on parts that have to keep their surface, cleaned where they are installed or stored, by one technician with the case beside them.


Mold cleaning
Release agent, rubber, plastic and carbon removed from cavities with the MW-LC case rolled up to the press. Laser mold cleaning machine
Oxide and pre-weld cleaning
Oxide films and heat tint on stainless steel, carbon steel and aluminum cleaned at the weld site, before or after welding. Laser oxide removal
Light rust on precision parts
Surface rust taken off machined and finished parts at the machine they belong to. Laser rust removal
Wood, stone and restoration
Wood, stone and building surfaces cleaned on site with the case beside the work. Wood cleans best at a slightly higher frequency; test a small area first.
Delivery and Operator Support
The same build and test routine as every MAXWAVE machine.
Assembled and tested
Each MW-LC is assembled, tested and packed for export before it ships.Inspected your way
Pre-shipment or remote video inspection is available. The process is on our About Us page.Supported after delivery
Training, routine care and spare parts are on our support and maintenance page.
Get a Quote for an MW-LC Trolley-Case Laser Cleaner
An engineer replies with the MW-LC model for your work, or the line that fits it better.
Five details for the right model
- Materials: what your crews clean.
- Layers: the paint, coating, oxide or rust on them.
- Surface: how much a typical job covers.
- Countries and supply: where you work and the supply on site.
- Photo: a part on site. Photos can follow on WhatsApp.
Phone / WhatsApp: +86 15327155363 · Call