
Get a Laser Cleaning Machine Quote: Send a Photo of Your Part to an Engineer
Send a photo of your part and the layer you need to remove. A MAXWAVE engineer recommends the laser cleaning machine that fits the job, then quotes that configuration.
Send Your Cleaning Requirement
Complete the fields and press send to Get a Quote. Photos of the part can follow on WhatsApp, and the engineer matches them to your request.
Request Form Fields and Why Each One Matters
Every laser cleaning machine quote is configured to your part, so the price follows the line, power level and options the job needs. Each field feeds one part of that decision.
Materialsteel · stainless · aluminum
Steel, stainless steel, aluminum or other, with thickness. Thickness decides between pulsed and continuous: on sheet below 4 mm, continuous-laser paint removal may distort the panel, so thin parts go to a pulsed line.
Fill in materialContamination typerust · paint · oxide · oil
Rust, paint, coating, oxide, oil or residue. Thin films such as oxide and light rust suit pulsed units; heavy rust and thick paint on large steel surfaces point to a continuous machine.
Choose contaminationArea and workloadper day or week
Part size and how much surface you clean per day or week. This sets the power level, and whether full shifts call for the water-cooled continuous line.
Fill in areaApplicationworkshop or on site
Production cleaning, maintenance, weld preparation, mold cleaning or contract work. It tells us whether the machine stays in the workshop or travels, which decides between a cabinet, trolley case or backpack unit.
Choose applicationCountryvoltage · export papers
Where the machine will be used. The supply voltage is matched (the 3000 W continuous model runs on 380 V) and the export documents are prepared for your destination.
Fill in countryRequirementanything else
Anything else that shapes the job, such as work at height, confined spaces, a fixed cleaning station or a part that may need a custom system.
Write the requirement
Three Steps After You Send Your Request
From your photos to a quote for one configuration.
- Step one · Review
An engineer reviews your photos
The engineer reads your photos together with the details you entered: material, layer, workload, application and country.
- Step two · Recommend
Line, power level and options
The engineer recommends a line, power level and options for your part. If a job splits between thin and heavy parts, we may propose two lines.
- Step three · Quote
A quote with delivery notes
You receive a quote for that configuration, with delivery notes on three points.
Inspection before dispatchPre-shipment or remote video inspection
Export packaging
Sea or air shippingExport documents for your destination
Distributor, Custom and Technical Enquiries
Three enquiries start better from their own page.
Distributors and OEM buyersWholesale and OEM
Configuration options, your logo on the cabinet and in the control software, and partner support.
Robot-assisted or special partsCustom laser cleaning system
Robot-assisted cleaning or a special part that a standard handheld machine does not suit.
Existing MAXWAVE usersTechnical support
A technical question on your machine: training, maintenance and spare parts.
Company Information
Wuhan Maxwave Laser Technology Co., Ltd.
Floor 1-2, Building B8, Leisure and Business Center, 28th Street, Panlongcheng Economic Development Zone, Huangpi District, Wuhan, Hubei, China
- Brand
- MAXWAVE
- Phone / WhatsApp
- +86 15327155363 · Call
- Contact
- Richard
