Laser Cleaning Equipment Wholesale and OEM: Resell Machines Backed by CE Attestations and Pre-Shipment Tests
Machines with build differences you can point to on the unit itself, so your quote wins on more than price.
BuildThe cabinet steel, the paint, the electrical brands, the wiring and the protective optics: when your customer compares your quote with another machine, you show them where the difference sits
WhoMAXWAVE supplies laser cleaning equipment wholesale to distributors, importers and OEM brands
LinesFour lines, from air-cooled pulsed cabinets to water-cooled continuous machines and two portable formats, for the fabrication plants, maintenance teams and contractors in your territory
EngineersRecommend the configuration for each end-customer job you send us
CEMachinery Directive attestations list our models
ISO 9001Quality management system
6 final testsOn every finished machine
InspectionPre-shipment, third-party or video, before dispatch
Six Build Points to Check on Any Laser Cleaner You Resell
Two laser cleaners at the same power look alike in a brochure. The difference shows when the cabinet is opened and the machine is switched on. Each of these six points is built into our machines, and each one is something you can show an end customer on the unit or in a photo.
MW-LCW cabinet side panel
Cabinet sheet metal
1.8 mm sheet · MW-LCW reinforced cabinet
Built to resist deformation. A thicker cabinet holds its shape when the machine is moved between bays or knocked on a fabrication floor.
Paint thickness gauge on the cabinet
Paint finish
A-grade paint · 80 to 120 µm
The same cabinet carries an A-grade finish. For your customer, this is the surface that takes daily workshop wear.
Schneider contactors inside the cabinet
Electrical brands
Schneider ×3 to 5 · Mean Well power supply
Relays and contactors, combination switch, metal switch and circuit breaker are Schneider; the power supply is a genuine Mean Well unit. These start the machine every morning and trip it safely on overload.
Every wire carries a number
Wiring and wire numbers
4 mm² five-core copper · purity ≥99.99%
Routed by our engineers, with every wire numbered. Your technician or our remote engineer traces a fault straight to the circuit, so every service call on a machine you sold gets shorter.
Quartz protective lens
Protective lens material
Quartz, not K9 glass · ≥99.85% transmittance
On the MW-LY and MW-LCW cabinets. The lens faces fume and spatter and protects the focusing optics behind it. A thicker, longer-lasting dual protective lens is an upgrade.
Cabinet status light, two states
Status light and alarms
3-colour light · air-pressure alarm · 3 min auto exit
The light shows the machine's three operating states, an alarm triggers on a drop in air pressure to the head, and the machine leaves working mode after 3 minutes unused. Your customer sees all three in a demonstration.
Laser cleaning equipment wholesale orders can carry more than one build of the same machine, matched to the budget and duty of each customer in your market.
Double-swing cleaning head
Quartz protective lenses, and the dual protective lens upgradeMW-LY · MW-LCW
Schneider electrical components and Mean Well power suppliesOptions we fit
Single-swing or double-swing cleaning head scanningOptions we fit
Bluetooth control of the cleaning head from a phone or tabletMW-LY · option
Rotary air blower protecting the field lensOptions we fit
Configuration on file
QuoteOur engineer writes the configuration into the quote.
RecordIt is recorded against each machine.
ReorderWhen you reorder for your next customer, the configuration is already on file, so the machine you receive matches the one you sold last time.
Your Logo on the Cabinet and in the Control Software, or the MAXWAVE Brand
For OEM partners, the unit your customer switches on carries your brand from the outside panel to the screen. The logo is confirmed with you before production.
Your logoCabinet front: logo plate under the screenControl software interface
The marked box shows the plate position. Your logo goes on the cabinet plate and into the control software interface.
Resell under MAXWAVE
Trademark reg. 66902017
The name on the machine is the same company named on the CE attestations and the ISO 9001 certificate, so the brand you sell has documents behind it.
Custom exterior
For partners who need a distinct look in their market, the machine exterior can be customized as part of the order. We confirm the exterior with you before production, so the first unit off the line is the one you approved.
Four Lines for the End Customers in Your Market
With laser cleaning equipment wholesale from one supplier, a laser cleaning machine distributor covers the fabrication plants, maintenance teams and contractors you serve, and your sales team does not have to size every machine alone. Side-by-side comparison: laser cleaning equipment
Installation, Operation and Demonstration Videos for Your Customers
Each machine ships with a documentation set you pass straight to your customer.
Installation instructionsDocument
Installation videoVideo
Operating tutorialsTutorials
Maintenance videoVideo
Demonstration videoVideo · sales tool
Sell before the showroom unit arrives
The demonstration video shows a prospect the machine running before you have a unit in your showroom.
Safety labels on the machine body
Safety warning labels are fixed on the machine body. Laser cleaning is Class 4 laser work and needs fume extraction at the cleaning point. Site setup: support and maintenance
Engineering Support When Your Customer Reports a Fault
When your customer comes to you with a question about a machine, our engineering team works on it with you.
Equipment record
Every machine we ship has its own record: line, power level and fitted options. When your customer reports a problem, our engineers start from that record, so the diagnosis begins with that machine's own configuration.
Video guidance
Full-time engineers give online video guidance with translation, and troubleshoot remotely from the photos and videos your technician or customer sends.
Spare parts
Matched to the equipment record, with regular follow-up on machines in service.
Response and warranty
An engineer responds within 24 h, and every machine you resell carries a 2-year parts warranty.
Protective lens check on the cleaning head
A typical case
The machine flags a damaged protective lens.
Our engineer responds on video.
A video shows how to identify the damage.
The engineer walks the operator through replacing the lens.
Certificates, final tests and inspection behind every machine you resell.
CE
CE (Machinery Directive) attestations list our laser cleaning machine models.
Quality system
We operate an ISO 9001 quality management system.
Final tests
Every finished machine is tested, and the test reports are complete.
Laser output powerOperating stabilityPulse parametersOptical componentsCoolingOverall performance
Certificates, test details and manufacturing stages: About Us
Final test run before packing
Inspection before dispatch
Four ways to check the machine before it is packed:
You, on site
Your China agent or forwarder
An authorized third party
A video call before packing
Custom items get a dedicated function test.
Distributor Partner Program in Five Levels, Upgraded With Your Annual Volume
Support grows with the volume you carry each year. Each level keeps everything below it and adds one benefit. Volume thresholds are set per territory and per line when you apply, so a cabinet distributor and a portable-unit reseller are each measured on their own business.
Level 1
Free gifts and discount
Free gifts with your orders and a distributor discount on all four lines.
Level 2
+ Rebate
A rebate on your annual volume, on top of the Level 1 discount.
Level 3
+ Service to door
Door-to-door service added to your package.
Level 4
+ Cooperative exhibition
We exhibit alongside you at trade shows in your market.
Level 5
+ Exclusive regional agency
Exclusive agency protection for your region.
Distributor Cooperation in Five Steps
From your first laser cleaning equipment wholesale inquiry to packing and shipping.
Inquiry
Your market, the customers you sell to and the lines you want to carry.
Configuration
Our engineer proposes line, power level and options per model; you confirm them in the quote.
Brand and exterior
You confirm MAXWAVE branding or the customized exterior before production.
Production and testing
Incoming inspection, assembly, electrical installation, software configuration, commissioning and final testing, then your inspection.
Packing and shipping
Export packing, sea or air, a transport manager tracking the shipment and export documents prepared.
Become a Distributor or Get a Quote
Use the form below with your country, the customer types you sell to and the lines that interest you, and we reply with a proposed starting range.
What to send
Your country and the territory you cover.
Customer types you sell to.
Lines that interest you, or the specific machine to quote.